DIY Fence Installation for Beginners: Where to Start and What to Expect
A first fence is very doable if you pick the right project and the right order. Here is both.

Building your own fence is one of the more satisfying weekend projects, and one of the more physical ones. This guide is for a first-timer: it helps you choose a project you can finish, lays out the steps in the right order, and is honest about where beginners get stuck.
Is DIY right for this fence?
Good beginner projects share a few things: level or gently sloping ground, soft soil, a short run under about 100 feet, no driveway gate, and a property line you are sure of. Each of these that is missing makes the job harder. A long run on a hillside through rocky ground, with a double gate across the drive, is a different project from a short side-yard fence on a flat lot.
Pick the easiest kind of fence to build
- Pre-built wood panels are the easiest start: you set the posts and fasten 6- or 8-foot panels between them. The catch is that posts must land at exactly the panel width.
- Stick-built wood means rails and boards cut and fastened on site. It is more work but forgiving, because you can adjust spacing as you go. How to install a wood privacy fence walks through it.
- Vinyl goes together like a kit, but the posts have pre-cut holes for the rails, so spacing and height must be exact. Mistakes are hard to undo.
- Chain link needs a come-along and some practice to stretch the mesh tight. It is easier to get wrong than it looks.
The steps, in order
- Check the rules and the line. Height limits, permits, HOA approval and where the property line runs, before you buy anything. The details are in planning a new fence in Seattle.
- Talk to the neighbor. Especially on a shared line. Agree on the exact position and which side faces out.
- Call 811. In Washington, at least two business days before you dig. Free, and required.
- Lay out the line. Stakes at each end and corner, a tight string between them, and every post position marked.
- Gather tools and materials. The list is in tools for installing fence posts. Have the gravel and concrete on site before you open the first hole.
- Dig and set the end and corner posts. Plumb, braced and in concrete.
- Set the line posts to a string. Top and bottom strings between the end posts keep every post in line. See how to align fence panels.
- Let the concrete set, then add rails, boards or panels. At least a day, longer before hanging a gate.
- Hang the gate, then finish. Caps, trim and, for wood, a stain once it has dried out.
How long will it take?
An experienced two-person crew builds a straightforward 100 to 150 foot wood fence on level ground in about two to four days. For a beginner working weekends, plan on at least two or three weekends, and more if the ground is hard. The posts take most of the time: digging, setting and waiting for concrete. The boards go up quickly by comparison.
Where beginners get stuck
- The digging. Rocks, roots and dense Seattle till turn a ten-minute hole into an hour. A digging bar and a rented auger help.
- Slopes. Deciding whether to step or follow the ground has to happen before the posts go in. Fence racking explains the choice.
- Gates. A gate that sags or will not latch is the most common complaint on a homemade fence.
- Straightness. Small errors add up over a long run, and they are permanent once the concrete sets.
The full list of what goes wrong is in common fence installation mistakes.
Doing part of it yourself
Some owners pay for the posts and gate, the heavy and unforgiving parts, and hang the boards or stain the fence themselves. If you are weighing it up, the fence cost calculator shows what a fully installed fence costs in about a minute. Ask about a split like that when you request an estimate; the visit and the written estimate are free.
More From the Blog
DIY & How-To
How to Install a Wood Privacy Fence: The Build, Step by Step
Layout, post holes, concrete, rails, boards and gate for a 6-foot cedar privacy fence, with the details that matter in the wet Seattle climate.
DIY & How-To
How to Align Fence Panels: Straight Lines, Even Heights, Clean Slopes
Straight fence panels start with the posts: string lines, exact spacing, cutting to height, stepping or racking on slopes, and fixing a crooked panel.
DIY & How-To
Tools for Installing Fence Posts: The Complete Checklist
Every tool for setting fence posts, from string line and post-hole digger to digging bar, auger and post level, with what to rent and what to buy.
Planning a fence?
Price it in a minute with the calculator, or send a few photos for a free written estimate.